m0n0wall – Released m0n0wall-CMI VmWare image
Networksoul Team announce that today released the VmWare image of m0n0wall-CMI (m0n0wall centralized management Interface). We had installed it in Ubuntu linux distribution and is working fine!VmWare image is built with the following paramenters:
username: m0n0wall-cmi password: m0n0wall Network parameters: DHCP Keyboard: USWhen you login to Ubuntu, double click on m0n0wall desktop link for connect to web interface of centralized management interface
You can download it in Download section and find any user documentation at m0n0wall web sites
NetworkSoul Team
AskoziaPBX – A new PBX IP now ready for all
We had published a new Askozia image by adding some base features that a pbx need to do:
The new PBX IP is now ready for company that need the following features:
- All base IP PBX features
- AA (one level automated attendant, also called IVR)
- BusinessHours Applications (automatic night&day applications and with code)
- AA with integrated BusinessHours Application (automatic night&day applications and with code)
Here the features added and the preconfigured snapshot.
In the next day we will publish the configuration guide for integrate Askozia with Cisco voice Gateway. So you can deploy a great solution at low cost with a Cisco1751-V router.
You can find the new image for alix.2X e3X preconfigured for ITALY and US (coming soon) users in the download category and all tech notes for how to in the support category.
Networksoul Team
AskoziaPBX – Preconfigured Image – Getting Started
Prerequisites The information in this document is based on these software and hardware versions: · Alix23x Embedded Appliance with preconfigured image installed · A PC with Ethernet connection Getting started After installed the preconfigured AskoziaPBX image on Compact flash (see Write Askozia image on CF), you are able to connect to the ALIX embedded appliance for verify configuration and tune it! The embedded Appliance start with 192.168.1.1 preconfigured LAN IP ADDRESS interface and with Username admin Password admin Attach an Ethernet cable from Ethernet interface of your PC and the LAN interface of the embedded device; put your PC ethernet interface in the same network address space of the embedded appliance for connect to it (for example 192.168.1.10 and netmask 255.255.255.0).
Try to reach the embedded device with an ICMP request from command line interface of your PC:
ping 192.168.1.1
you should receive an ICMP response; this indicate that you can connect via http and view/modify the configuration.
http://192.168.1.1
You will be asked to insert username and password for login!
CISCO – Show command from global configuration
Do you know that you can do all show command from cisco IOS global configuration mode (or for example from interface configuration mode) without exit from it?
Try with the “do” command before the command that you want execute (see below):
router.test(config-if)#
router.test(config-if)#do show run interface vlan 4
Building configuration…
!
interface Vlan4
description ‘Private network” ip address 192.168.1.2 255.255.255.0
ip flow ingress
standby 4 ip 192.168.1.1
standby 4 priority 110
standby 4 preempt
end
router.test(config-if)#
Networksoul Team
Categories
- Arduino (2)
- AskoziaPBX (6)
- cisco (1)
- Debian Lenny (6)
- general (1)
- Home server (6)
- Linux (6)
- m0n0wall (1)
- switching (1)
- voice (1)
- Voyage Linux (6)
AskoziaPBX
You can find the PBX IP preconfigured image here:
And obtain all support information "how to" here:
